GF Signet 8150 Battery-Powered Flow Totalizer - Manual

Integral Mount
96 mm
(3.8 in.)
96 mm
(3.8 in.)
FRONT VIEW
106 mm
(4.2 in.)
82 mm
(3.2 in.)
Universal Mount
92 mm
(3.6 in.)
97 mm
(3.8 in.)
56 mm
(2.2 in.)
41 mm
(1.6 in.)
Optional
Rear
Cover
Panel Mount
SIDE VIEW
102 mm
(4.0 in.)
42 mm
(1.7 in.) 60 mm
(2.3 in.)
96 mm
(3.8 in.)
Signet 8150 Flow Totalizer
General
Compatibility:
Signet 515, 525 Flow Sensors
Input Frequency Range: 1 to 400 Hz
Accuracy: ±0.5% of reading
Enclosure:
• Dimensions:
1/4 DIN (96 mm × 96 mm × 50 mm)
(3.8 in. × 3.8 in. × 2.0 in.)
• Case material: PBT resin
• Keypad material: Sealed 4-key silicon rubber
Display: LCD type
• 4-digit upper line: fl ow rate
• 8-digit lower line: Three totalizer options:
Permanent Totalizer for life of instrument
Totalizer 1: resettable from keypad or remote 30 m (100 ft)
Totalizer 2: resettable with security code only
• Display Contrast: Automatic
Electrical:
• Battery:
Two 3.6 V lithium thionyl chloride,
AA-size
(Use SAFT LS14500 Lithium Batteries or Equivalent Only)
• Sensor power output:
+3.6 VDC @ 20 μA
• Battery life: 4 years nominal @ 50 °C (122 °F)
• Low Battery indication: Battery symbol on LCD display
Environmental:
• Operating Temperature: -10 °C to 65 °C (14 °F to 149 °F)
• Storage Temperature: -40 °C to 100 °C (-40 °F to 212 °F)
• Relative Humidity:
0 to 95%, non-condensing
• Rating: NEMA 4X/IP65 (front panel)
Shipping Weight: 0.5 kg (1.1 lbs.)
Quality Standards:
• CE, CUL, UL
• Manufactured under ISO 9001 for Quality, ISO 14001
for Environmental Management and OHSAS 18001 for
occupational health and safety.
2. Specifi cations
Dimensions
3-8150.090-1 Rev. J 12/12 English
Topic Page
1. Description 1
2. Specifi cations 1
3. Installation 2
4. Wiring 4
5. Battery Installation and Replacement 4
6. Operation 5
7. Security Code 6
8. Totalizer Operation 7
9. Automatic Calibration 9
1. Description
The Signet 8150 Flow Totalizer is a battery-powered instrument capable of providing uninterrupted fl ow and total volume information for
4 years and beyond. The unique features of the 8150 include:
• Easy setup and display selection with 4-button keypad.
• User selectable security access to prevent unwanted programming changes.
• Displays
fl ow rate from 0.001 to 9999 engineering units with an auto-ranging decimal point.
• Three totalizers, one permanent and two that are independently resettable.
• Displays elapsed time between operating periods.
• Integral mount and panel mount options.
• 3.6 V lithium batteries last 4 years nominal in most applications.
• Non-volatile memory stores all programming and totalizer values even when batteries are removed.
Topic: Page
10. Flow K-Factor 10
11. Total K-Factor 11
12. Time Base 12
13. Decimal Point Placement 13
14. Speed 14
15. Sensitivity 15
16. Troubleshooting 16
17. Flow and Totalizer K-Factor Selection 16
18. K-Factor Charts 17
19. Ordering Information 20
*3-8150.090-1*
English
China RoHS (Go to www.gfsignet.com for details)
Declaration of Conformity according to FCC Part 15
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and,
(2) This device must accept any interference received,
including interference that may cause undesired operation.