Burkert Type 8611 - Manual (Page 93)

93
FunctionsoftheConfigurationLevel
12.18. CODE - code protection
Access to the configuration level can be protected by a code. Any unauthorized persons are thus denied access
and cannot change the parameters.
If the code protection is activated, there is a prompt to input the code prior to each blocked operator action.
The following operator actions are blocked if code protection is activated:
• Changing the controller parameters in operating state MANUAL under the
PARA menu (see chapter 11.8)
• Access to the configuration level (see chapter 12.1)
factory setting:
Upon delivery from the factory, the display in the
CODE menu is set to 0000. This means that the code
protection is not activated. Switching to the configuration level (see chapter “9.2.1. Switching between
the operating levels and operating states”) is done without query of the code.
Setting the code protection in the menu:
CODE
enter
code
DSPL
0000
CODE
A value between 0001 and 9999 can be entered for the
code protection.
If 0000 is entered, the code protection is not activated.
Figure 68: CODE; Setting the code protection
12.18.1. if you have forgotten the code
If you have forgotten the code, access is possible using a master code.
In this case, please contact your the sales office responsible for you. The contact details can be found on our
homepage under
www.burkert.com Bürkert Company Locations
english
Type 8611