Burkert Type 8611 User Manual
Page 49
49
FunctionsoftheConfigurationLevel
Settings in the menu:
Continue with
selection of actuating element
(see chapter 12.3.2 to
chapter 12.3.6)
select frequency input for sensor input Q
2
select standard signal for sensor input Q
2
MODE
selection of control variable
0001
CODE
RATI
NORM
**
)
FREQ
*
)
*
)
FREQ: The sensor-specific K-factor is entered in the
KFAC menu.
**
)
NORM: The scaling of the standard signal is selected in
the
S_IN menu
Figure 29:
RATI; Setting the ratio control
particularity of the control cabinet model!
In the control cabinet model, the standard signal input is available for Q
1
in addition to the frequency input.
However, for the inputs Q
1
and Q
2
, a standard signal (
NORM) can only be assigned once.
If the standard signal was selected for sensor input Q
2
(
MODE, RATI, NORM) only frequency is available
when selecting the process value input Q
1
.
Example:
selection of sensor input Q
2
selection option for process value input Q
1
FREQ (frequency)
FREQ (frequency) or NORM (standard signal)
NORM (standard signal)
FREQ (frequency)
Table 15:
Select NORM/FREQ for sensor input and process value input
english
Type 8611