Burkert Type 8611 - Manual (Page 44)

44
FunctionsoftheConfigurationLevel
12. funcTiOns Of The cOnfiguraTiOn
leVel
12.1. general description
In the following description of the menu options and their operating structures, the entire software of the eCONTROL
Type 8611 is explained. This complete software scope is only available for the control cabinet model of the eCONTROL
Type 8611.
The menu structure may vary depending on the device model (wall, valve, rail or fitting assembly). In accordance
with the device model, only menu options that are logically purposeful for the application area can be selected. This
pre-selection is made upon delivery of the controller in accordance with the chosen order part number.
Any changes made within the configuration level are only stored after returning to the process operating
level.
Access to the configuration level can be protected by a code. Any unauthorized persons are thus denied
access and cannot change the parameters.
If the code protection is activated, a code must be entered before switching to the configuration level
(see chapter “12.18. CODE - Code protection”).
english
Type 8611