Burkert Type 8611 User Manual
Page 41
41
FunctionsoftheProcessOperatingLevel
11.8.
PARA – display and optimization of the controller
parameters
In this menu of the process operating level, the controller parameters of the running process can be optimized.
The new controller parameters are taken over immediately after pressing the ENTER key.
The detailed description of the controller parameters depending on the selected process variable can be found in
chapter “11.8. PARA – Display and optimization of the controller parameters”.
Access to this menu can be protected by a user code (see chapter “12.18. CODE - Code protection”)
Back to operating state
AUTOMATIC
PARA
VALV
0000
CODE *
)
0000
XXX
Enter code.
*
)
Display is shown only if
code protection was acti-
vated in the CODE menu
(see chapter 12.18)
DEAD
**
)
KP 1
**
)
KP T
**
)
KP 2
**
)
TN T
**
)
TREG
**
)
DE T
**
)
TN
**
)
BACK
Enter value
**
)
The display depends on the control variable
set in the
Figure 23:
PARA; Display and optimization of the controller parameters
english
Type 8611