Burkert Type 8611 - Manual (Page 8)

8
BasicSafetyInstructions
3. Basic safeTy insTrucTiOns
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation, operation and maintenance of the devices.
• local safety regulations – the operator is responsible for observing these regulations, also with reference to the
installation personnel.
general hazardous situations.
To prevent injury, ensure that:
• any installation work may be carried out by authorized technicians and with the appropriate tools only.
• after an interruption in the power supply or pneumatic supply, ensure that the process is restarted in a defined
or controlled manner.
• the device may be operated only when in perfect condition and in consideration of the operating instructions.
• the general rules of technology apply to application planning and operation of the device.
NOTe!
electrostatic sensitive components / modules!
The device contains electronic components, which react sensitively to electrostatic discharge (ESD). Contact
with electrostatically charged persons or objects is hazardous to these components. In the worst case scenario,
they will be destroyed immediately or will fail after start-up.
• Observe the requirements in accordance with EN 61340-5-1 and 5-2 to minimize or avoid the possibility of
damage caused by sudden electrostatic discharge!
• Also, ensure that you do not touch electronic components when the power supply voltage is present!
The process controller Type 8611 was developed with due consideration given to the accepted safety rules
and is state-of-the-art. Nevertheless, dangerous situations may occur.
Failure to observe this operating manual and its operating instructions as well as unauthorized tampering
with the device release us from any liability and also invalidate the warranty covering the devices and
accessories!
english
Type 8611