Dynasonics TFXP Series Transit Time Ultrasonic Flow Meter - Manual (Page 92)

Rev. 5/09
-4.14- TFXP
Saving the
Configuration
Printing a
Report
Saving Meter Configuration on a PC
The complete configuration of the flow meter can be saved from the
Configuration screen. Select File Save button located in the lower
left-hand corner of the screen and name the file. Files are saved as
a *.dcf extension. This file may be transferred to other flow meters
or may be recalled should the same pipe be surveyed again or
multiple meters programmed with the same information.
Printing a Flow Meter Configuration and Calibration Report
Select File from the upper task bar and Print to print a calibration/
configuration information sheet for the flow meter installation.
Figure 4.9 — Calibration (Page 3 of 3)
PART 4 - SOFTWARE UTILITIES