Dynasonics TFXP Series Transit Time Ultrasonic Flow Meter - Manual (Page 42)

Rev. 5/09
-3.4- TFXP
Display
Contrast
In the RUN mode pressing the SELECT soft key highlights one of
the display lines. Successively pressing the SELECT soft key cycles
through all of the display lines. Use the UP/DOWN arrow keys to
select desired parameter. When the correct choice is shown, press
the SELECT soft key once again to lock in the choice.
If changes to any configuration parameters have been made, the
user will be prompted with a SAVE? YES when returning to RUN
mode.
The UP/DOWN arrow keys are also used to adjust the display
contrast level. In RUN mode pressing the up arrow key increases
the contrast and pressing the down arrow decreases the contrast.
The eight menus used in the structure of the TFXP are as follows:
1. Basic Menu – The Basic operations menu contains all of the
configuration parameters necessary to program the meter to
measure flow.
2. Datalog Operation – Datalog Operation configures the data
logging location, logger interval and logging duration.
3. Datalog Maintenance – Datalog Maintenance allows data
logger files to be erased from the logger.
4. Output 2 Menu – Output 2 menu configures the type and
operating parameters of the 4-20 mA or other ISO-MOD located
internally in the TFXP flow meter.
Menu
Structure
Figure 3.2 — 2 Line vs 4 Line Display
PART 3 - KEYPAD CONFIGURATION