Datamax-O'Neil A-Class Mark II Operator’s Manual User Manual
Page 76
66
A-Class Mark II
Diagnostics (continued)
Menu Item
Details
PRINT TEST RATE (min)
Allows a label-to-label delay when batch printing Test
Labels, where:
000 (0 – 120)
Is the selected interval, in minutes.
SENSOR READINGS
Displays various sensor values (0 – 255), where:
THR TRAN RIBM 24V
127 159 093 175
PS HD RANK
00 254 125
Are readings for the printhead thermistor sensor
(THR), media “gap” (TRAN) or “reflective” (REFL)
sensor, ribbon sensor (RIBM), 24VDC power supply
sensor (24V), present sensor (PS), printhead assembly
sensor (HD), and printhead ranking resistor (RANK).
(The values given here are examples only.)
RIBBON SENSOR LIMITS
Displays ribbon sensor values for thermal transfer
equipped printers, where:
RIBBON ADC LOW
039
RIBBON ADC HIGH
250
Are the sensor readings. (The values given here are
examples only.)
iPH REPORT
Displays the IntelliSEAQ™ data (including the
printhead serial number, and installation and
maintenance dates) where:
VIEW
Displays the data.
PRINT
Prints the data:
SAVE
Saves the data to an external storage device; see
Section 2.3.5.
FLASH MODULE REPORT
Displays the status and error history of the internal
memory modules.
VIEW
Displays the data.
Prints the data.
iPH REPORT
TUE 12:44PM 23MAY2006
4212-HE25-060224-090
PRINTHEAD SERIAL #: 5x-00289
PRINTHEAD MODEL # 163
PRINTER SERIAL # 60430014
PRINTHEAD INCHES 1334900
INSTALLATION DATE - INITIAL 02/02/2006
INSTALLATION DATE - LAST 08/06/2006
PRINTHEAD CLEANING
CLEAN PROCEDURES: 5
CLEAN COUNTER RESET 5
NUMBER OF INCHES LAST- 0