Datamax-O'Neil A-Class Mark II Operator’s Manual - Manual (Page 44)

34 A-Class Mark II
Media Settings (continued)
Menu Item Details
RIBBON LOW OPTIONS
Defines the response when THERMAL TRANSFER is
selected and the ribbon supply diminishes, where:
RIBBON LOW DIAMETER
Sets the threshold that will trigger a Low Ribbon
Warning prompt, where:
(1.0 0 – 2.00 in.)
1.38
Is the outer diameter size of the roll.
PAUSE ON RIBBON LOW
Sets the printer to pause when the Ribbon Low
Diameter setting is met, where:
ENABLED
Forces you to press the PAUSE Key to proceed with the
print job.
DISABLED
Allows printing to continue until ribbon empty is
declared.
SENSOR CALIBRATION Selects the method that is used to calibrate the media
sensor (see Section 5.2), where:
PERFORM CALIBRATION
Allows automatic calibration, where:
YES
Establishes the best values based on sampled
readings.
NO
Exits the menu item without changing the current
settings.
ADVANCED ENTRY
Sets the values via manual entry process, where:
PAPER SENSOR LEVEL
170 (0 – 255) Establishes the threshold value for standard paper.
REFL PAPER LEVEL
020 (0 – 255) Establishes the threshold value for reflective paper.
GAP SENSOR LEVEL
016 (0 – 255) Establishes the threshold value for the gap/notch.
MARK SENSOR LEVEL
230 (0 – 255) Establishes the threshold value for the reflective mark.
EMPTY SENSOR LEVEL
009 (0 – 255) Establishes the threshold value for the empty
condition.
TRAN SENSOR GAIN
31 (0 – 31) Establishes the sensitivity of the gap/notch sensor.
REFL SENSOR GAIN
13 (0 – 31) Establishes the sensitivity of the reflective sensor.