Datamax-O'Neil A-Class Mark II Operator’s Manual - Manual (Page 153)

A-Class Mark II 143
Appendix F
Saving a Configuration File
Configuration files can be used to retain special printer settings, eliminating the need for repeated
setups. Unique filenames can be assigned then the setups restored, as needed, via the host or
printer menu. The following example saves a calibration setting in a configuration file:

If file sharing among printers, DO NOT include unique parameters (such as calibrations
and adjustments) when saving.
Step Action Displayed Message
1
With the printer set for the configuration to be saved,
press the MENU Key. (See Section 4.1 for Control Panel
details.)
MEDIA SETTINGS
2 Scroll to SYSTEM SETTINGS then press the ENTER Key. SYSTEM SETTINGS
3
With CONFIGURATION FILE highlighted, press the
ENTER Key.
RESTORE AS CURRENT
MEDIACAL
4
Scroll to SAVE SETTING AS then press the ENTER Key
and input a name, using up to nineteen alphanumeric
characters, for the configuration file. (This example
uses the filename MEDIACAL.)
5
Press the ESC Key repeatedly to save the file and return
to READY.
MEDIACAL SUCCESSFUL

To restore a configuration file via the printer, see Section 4.2.4.