Datamax-O'Neil A-Class Mark II Operator’s Manual - Manual (Page 41)

A-Class Mark II 31
4.1.2 Keypad Functions
The Soft Keys (see Section 4.1) control printer functions:
• The Soft Keys are mode-dependent, changing functions as needed. Depending upon the
printer’s state, many functions can be accessed by pressing (or pressing and holding for
various durations) the keys and buttons:
Keypad Functions
Function
Printer
State
Pressing Sequence
Related
Section
Calibration, Empty Value Idle Long PAUSE & FEED 5.2
Calibration, RFID Option Idle Long FEED & TEST 4.2.3
Calibration, Quick Idle Long FEED 3.4
Display Contrast Adjustment* Idle Hold MENU 4.1
Display large fonts Idle TEST Key (then ZOOM) 4.1.1
Feed / Clear Fault Idle FEED 4.1
Pause Idle PAUSE 4.1
Print Label, Configuration Idle FEED & CANCEL 4.3.5
Print Label, Network Idle PAUSE, FEED, & CANCEL 4.2.5
Print Label, Quality Idle PAUSE & FEED 4.3.1
Reset, Soft Idle Long CANCEL 5.3.1
System Menu Idle MENU 4.2
Test Menu Idle TEST Key (then TEST) 4.3
Hex Dump Mode Power-Up Hold FEED 6.2
Reset, Level 1 Power-Up PAUSE & FEED 5.7.2
Reset, Level 2 Power-Up Hold PAUSE, FEED, & CANCEL 5.7.3
*
When using the remote display option, both the remote display and the display mounted to the printer share the same contrast setting.