Datamax-O'Neil A-Class Mark II Operator’s Manual - Manual (Page 134)

124 A-Class Mark II
File Handling Messages
Depending upon the module and operation selected, several messages are possible when using the
file handling system:
File Handling Messages
Displayed
Message
Description Possible Solution(s)
FAILED
The copy or format
request has failed.
Insufficient space exists to store the file or the
module is protected - try storing to a different
location. (If the problem persists, this could
indicate a hardware problem.)
FILE EXISTS,
OVERWRITE?
An existing file of the
same name and type
was found.
Select YES to overwrite or NO to exit.
MODULE
PROTECTED
Formatting has been
denied because the
module is protected.
Unprotect the module.
NO FILES
AVAILABLE
No associated files can
be found to perform the
requested action.
Ensure the file is present:
Following a Print File request, this is normal
when no files are available for printing (also
note that some files will print only the file
name);
Following a Process File request, this is normal
when no files are available for processing (also
note that some files may not display); or,
Following a Copy File request, this is normal
when no files are available for copying (also
note that internal database files cannot by
copied).
NOT SUPPORTED The file type requested is
not supported.
Recheck the type of file requested for printing or
processing, and ensure that it matches one of the
available types for that function.
PROTECTED,
COPY FILE?
The file requested will be
copied to a protected
module.
Select YES to override protection and copy the
file, or NO to exit.
UNFORMATTED
The module is
unformatted.
Format the module.
FORMAT MODULE will erase all data
in the selected memory.