Datamax-O'Neil A-Class Mark II Operator’s Manual - Manual (Page 5)

Important Safety Instructions
Throughout the literature accompanying this unit, the exclamation point within an
equilateral triangle is intended to alert you to the presence of important operating and
maintenance instructions.
This unit has been carefully designed to provide years of safe, reliable performance. However, as
with all electrical equipment, there are some basic precautions that you should follow to avoid
personal injury or damage to the printer:
• Before using the print engine, carefully read all the installation and operating instructions.
• Moving parts are present during operation – keep body parts, loose clothing, etc. away from
the mechanism.
•
Observe all warning instruction labels on the print engine.
•
Mount the print engine securely in the applicator system.
• Do not place the print engine on or near a heat source.
• To protect from overheating, make sure no openings on the print engine are blocked.
•
Never insert anything into the ventilation slots and openings of the print engine.
• Do not use the print engine near water or spill liquid into it.
• Ensure that the AC power source complies with the ratings listed for the print engine.
•
Do not place the AC power cord where it can be stepped on, and if the power cord becomes
damaged replace it immediately.
•
Consult only qualified, trained personnel to perform service on this device: no user-
serviceable parts are inside; do not remove the cover.
Special Text Instructions

The green check box is intended to alert you to conventions used within this text or to
notable operating details and suggestions.
Applicability
The procedures, functions, and parameters described in this document are written according to an
Application Version of printer firmware. To identify the Application Version that corresponds to this
text, see Print Configuration in Section 4.3.5. To update the Application Version of your printer,
visit our website at www.datamax-oneil.com to download firmware.