Datamax-O'Neil A-Class Mark II Operator’s Manual - Manual (Page 70)

60 A-Class Mark II
Communications (continued)
Menu Item Details
FTP
Sets File Transfer Protocol to transfer data, where:
ENABLED
Allows FTP.
DISABLED
Disables FTP.
MTU Sets the Maximum Transmission Unit packet size, where:
(512 - 65515)
01500 Is the packet size, in bytes.
GRATUITOUS ARP
Sets the Address Resolution Protocol notification rate,
where:
(0 - 2048)
0000 Is the time, in minutes.
PORT NUMBER Sets the network communications port, where:
(1 - 65535)
09100 Is the Port Number.
TCP KEEPALIVE Allows monitoring of an open connection to detect any
disconnects not properly closed, including reset access
points and unplugged printers, where:
ENABLED
Keeps monitoring active.
DISABLED
Closes such a disconnection after 2.5 minutes.
DUPLEX CAPABILITY Sets the communication capability for the Wired
network, where:
AUTO-NEGOTIATE
Automatically selects the best type.
100BASET HALF
Selects 100 Mbit/s half duplex (in both directions, one
way at a time) operation.
100BASET FULL
Selects 100 Mbit/s full duplex (in both directions,
simultaneously) operation.
10BASET HALF
Selects 10 Mbit/s half duplex (in both directions, one
way at a time) operation.
10BASET FULL
Selects 10 Mbit/s full duplex (in both directions,
simultaneously) operation.
ADVERTISE CAPABILITY Transmits the printer’s communication capability for
the Wired network, where:
AUTOMATIC Advertises the DUPLEX CAPABILITY set value.
ALL CAPABILITIES Advertises all possible values for DUPLEX CAPABILITY.