Ocean Optics SpectraSuite - Manual (Page 171)

A: Experiment Tutorials
000-20000-300-02- 201110 159
c. If you are using an integrating sphere, check the Use Integrating Sphere option.
d. If you know the collection area, check Collection Area and enter the value.
e. If you are using a bare fiber or a cosine corrector, check Fiber Diameter and enter the
value.
f. If you are using an Ocean Optics cosine corrector or a direct attach cosine corrector, enter
the appropriate value for the Fiber Diameter as follows:
Cosine Corrector Fiber Diameter
CC-3 3900 microns
CC-3-UV 3900 microns
CC-3-DA 7140 microns
g. Then click . The Set Acquisition Parameters screen appears.