EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 95)

10. Press CTRL+V to paste the playlist.
The following dialog box pops up:
Copy Playlist xx/xx to yy.
Select Copy Playlist Mode (Space Bar)
Playlist Only
Playlist with Clips: Short Mode
Playlist with Clips: Long Mode
Esc: Cancel - Enter: Confirm
11. Press the SPACEBAR to select the requested copy option.
12. Press ENTER to confirm. The playlist is copied to the requested location.
Merging Playlists
From the VGA Interface, it is possible to merge two playlists by copying a playlist and
pasting it to an existing playlist. The copied playlist will be added at the end of the
destination playlist.
5.5.5. Naming a Playlist or Playlist Element
Introduction
You can name or rename a playlist or one of its elements only from the VGA interface.
Note
When entering a name, use BACKSPACE to delete the last character or ESC
to clear the entire field.
How to Name a Playlist
From the Playlist Bank Window
To name a playlist from the VGA Playlist Bank window, proceed as follows:
1. From the Clip screen, press END to go to the Playlist Bank screen of the requested
page.
2. Use the DOWN ARROW to select the playlist to name.
3. Enter the desired name on the keyboard. It appears in the Name field at the bottom of
the screen.
4. Press F1 to assign the new name to the selected playlist. The playlist name appears
in the title bar next to the playlist number.
OPERATION MANUAL Multicam LSM 11.02
5. Playlist Management 85