EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 81)

5.3. Playlist Functions on the Remote
Panel
5.3.1. Edit and Playout Modes
Introduction
Two modes are available on the Remote Panel to access and manipulate the playlists:
The Playlist Edit mode and the Playlist Playout mode:
• The Playlist Edit mode is used to modify the playlist.
• The Playlist Playout mode is used to roll the playlist on air.
Editing the playlist in Playlist Playout mode is not possible.
Accessing the Playlist Edit Mode
When you load a playlist pressing the PLST key on the Remote Panel, you directly enter
the Playlist Edit mode. The first frame of the element highlighted in the playlist appears on
the PGM. At the start, full control will be on the PGM side; scrolling through the playlist
can be done here.
Note
From the Playlist Playout mode, you need to press the EDIT function (D button)
or move the jog dial to return to the Playlist Edit mode from where you can edit
the playlist.
The main menu in the Playlist Edit mode available is the following:
Effect Edit All
Insert Speed FX Dur Delete
A secondary menu is also available when you select MENU from the main menu in the
Playlist Edit mode. All commands are not always available in the secondary menu:
Clr Unav OtherAng Add cut
Replace MakeLoc Redo Undo
In Playlist Edit mode, the duration displayed in the top right corner of the LCD screen is
the playlist total duration, from the beginning to the end.
OPERATION MANUAL Multicam LSM 11.02
5. Playlist Management 71