EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 102)

5.6.2. Deleting and Moving Playlist Elements
Introduction
Just as you can add clips into a playlist only with the Remote Panel, deleting clips from a
playlist or moving clips within a playlist are also performed via the Remote Panel.
How to Delete an Element from a Playlist
To delete a playlist element in a playlist, proceed as follows:
1. While you are in Playlist Edit mode, scroll within the playlist to the element that needs
to be deleted.
If the Browse mode is active, the first frame will appear on the display as each clip is
scrolled through.
2. Select Delete from the Playlist Edit menu.
The selected element will be removed from the playlist. A confirmation message will
appear if the Confirm Ins/Del clips parameter has been enabled in the Operational Setup
menu (p.3.2 F1).
How to Move an Element within a Playlist
Note
You can only move elements within a playlist if you are in PGM/PRV mode.
To move a playlist element within a playlist using the Remote Panel, proceed as follows:
1. While you are in Playlist Edit mode, scroll within the playlist to the clip that needs to
be moved.
2. Select Delete from the Playlist Edit menu. The clip is sent to the clipboard and loaded
on the PRV channel.
3. Scroll to the location in the playlist where you want to insert the clip.
Remember that the position where the clip is inserted will depend on the value of the
Insert in playlist parameter in the Operational Setup menu (p3.1 F6), that is to say before
or after the selected playlist element.
4. Press TAKE or Insert on the Remote Panel to insert the clip from the clipboard at the
requested location.
The playlist element is inserted at the requested location.
If the playlist element has been trimmed before being moved, the element will be
reinserted in the new position with the new guardbands.
92 5. Playlist Management
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013