EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 198)

9.4. Split Screen Mode
9.4.1. Introduction
The Split Screen mode, which is a software option, allows a simple split screen effect on
PGM 1. This mode operates very similarly to the 2PGM mode, except that the two outputs
are now left and right parts of the screen (vertical split screen) or top and bottom part of the
screen (horizontal split screen) or mixed together on the entire screen (Split Mix mode).
The Split Screen mode also allows for DVE-like adjustment of the video within the split
effect, for optimum positioning of the material.
Note
The horizontal Split Screen mode is not available in HD Supermotion 3x in
DVCPro HD and MPEG 2 i-frame 1080i.
9.4.2. Using Vertical Split
The Vertical Split function is controlled from the Remote Panel:
PGM1 CAM A *PGM2* CAM B
Aud.Met. PgmSpd Sort->TC PostRoll
Sw to IN Search Pref
P.1 B.1 Clips: LOCAL Records: LOCAL
PL 11: <
Msg:
V Split Swap Sync
Left Right L & R SHIFT
Press the SHIFT+D to switch between normal and special commands:
V Split Swap Sync
<-Lf-> <-Rg-> <-WP-> SHIFT
188 9. Advanced Control Modes
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013