EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 190)

Bottom Display Line
Displayed letter Function
Z Toggle between Zoom, Static Zoom and normal highlight.
M Mark a keyframe directly from the touch screen or from the tablet. If
this option is active, touching a point on the screen automatically
creates the keyframe. This option becomes inactive after each
keyframe creation.
<<< >>> Search the material (clip or live recording).
A single click with the stylus moves one frame forward or
backward.
C Mark CUE OUT point on current field.
S Start slow-motion (preset in Prg Spd).
P Play back the current clip.
The clip countdown displays the field time. This means that the countdown matches the
slow motion speed.
Note
Selecting C (clear) from the monitor enters the Clear menu and the DFC menu.
This DFC menu allows you to select the brush color from a YUV color palette.
Note
If working in network mode, you can apply a Paint on remote clips as well as on
local clips.
9.2.3. Tracking Object Creation
1. Select the type of tracking object to use.
2. The character on the left of the “T” letter on the 1
st
line of the OSD shows the current
object:
Character Current object
O (letter “o”) Indicates a circle (default option)
0 (zero) Indicates an ellipse
↓ / ↑ / → / ← Indicates an arrow
█ Indicates a rectangle
Z Indicates the zoom mode is active (circle only available in
this mode)
180 9. Advanced Control Modes
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013