Accessing the offside line mode – EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual User Manual

Page 194

Offside Line Mode Activation

To activate the Offside Line mode, you need to set as follows the parameters in the
Operational Setup menu on the Remote Panel:

•

Set the Offside Line parameter (p.12.3 F1) to ‘Yes’.

•

Set the External Offside parameter (p.12.3 F2) to ‘No’.

Note
When you activate the offside line, you can no longer use a second controller.

9.3.2.

Accessing the Offside Line Mode

1. To activate the Offside Line mode, set the following parameters in the Operational

Setup menu on the Remote Panel:

◦

Set he Offside Line parameter (p.12.3 F1) to ‘Yes’.

◦

Set the External Offside parameter (p.12.3 F2) to ‘No’.

Note
When you activate the offside line, you can no longer use a second controller.

2. When the offside line mode is active, the Offside Line option is available from the

operational menu in the PGM/PRV or Multi PGM mode:

Rst Cam

Local

Sync Prv

OFFSIDE

Cam A

Cam B

3. Press the SHIFT+D key to access this mode .

184

9. Advanced Control Modes

EVS Broadcast Equipment S.A.

Issue 11.02.A July 2013