Naming a clip using the keywords, Searching the database using the keywords – EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual User Manual

Page 167

7.6.

Naming a Clip Using the Keywords

In the VGA Interface

1. Move the cursor to the desired keyword.

2. Press ALT+N.

3. The keyword is added at the end of the current name if there is enough space left.

Note
To clear the name of a clip:

1. Press ESC to empty the Name field.
2. Press F1 to assign this “empty name” to the clip.

7.7.

Searching the Database Using the
Keywords

Keywords and ranking assigned to clips can be used to search the clips database.

In the Remote Panel Interface

•

When the current element on the primary channel is a record train, the Search function
is directly available from the C position in the secondary menu. To call it, press MENU
to enter the secondary train menu, then press once the C key.

•

When the current element on the primary channel is a clip, the Search function is still
available from the same location, but is “hidden” behind the Name function. To call it in
this case, press MENU to enter the secondary clip menu, then press twice the C key.

In both cases, the LCD display looks like (in LIST mode):

keyword89012

F1:action_1

F6:action_6

F2:action_2

F7:action_7

F3:action_3

F8:action_8

F4:action_4

F9:Prev.pagep.01

F5:action_5

F0:Next page

Reset