EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 107)

5.7. Transition and Audio Operations
5.7.1. Overview on Transition Effects
Introduction
You can apply effects on the audio and video transitions of a clip in a playlist. For each
transition, you define the effect type and duration. You can only apply transition effects
using the Remote Panel.
The following drawings show that the transition effects are applied on the material
included in the playlist element, not on the guardbands:
Normal Playlist with Cuts Illustration
Playlist with 1:00 sec Effect Duration Illustration
In an LSM playlist, the video and audio effects end at the OUT point of a clip, so the
duration of clips is shortened by the length of the effect.
OPERATION MANUAL Multicam LSM 11.02
5. Playlist Management 97