EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 193)

The Static Zoom allows the user to zoom an area of the picture via a picture in picture
display.
In the Static Zoom mode, at the bottom left of the screen, a “P” appears on the OSD to
define the position of the static zoom.
Click on the P and move the cursor to indicate where the static zoom should be.
9.3. Offside Line Mode
9.3.1. Introduction
Note
The internal Offside Line mode is a software option, which requires the license
code 114. For more information on the required license key, contact the Support
or Sales teams.
Note
The internal Offside Line mode is not available on EVS servers working with 10-
bit codecs.
The internal Offside Line mode makes it possible to make the offside line visible on the
screen by shading a portion of the pitch. You can use this feature on clips or trains loaded
on the PGM1. This effect can then be recorded in the loop of the server and reinserted in
the feed of a recorder channel.
The external Offside Line mode offers a more advanced offside line feature, as well as
other live tools, when the EVS server is used in combination with the Epsio application.
For more information, refer to the Epsio user manual.
OPERATION MANUAL Multicam LSM 11.02
9. Advanced Control Modes 183