beautypg.com

Shortening a clip, Displaying results, Examples – EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual User Manual

Page 76

background image

Displaying Results

If matching clips are found, the Remote Panel will automatically be in Browse mode (the
Browse key is red), allowing the operator to quickly view the frame of each clip
corresponding to the requested timecode by rotating the jog dial.

To be able to jog inside a clip, disable the Browse mode by pressing on the Browse
key and move the jog dial.

To return to the Browse mode inside the search results, press the Browse key again.

Search results are reset when going by to LIVE mode, or when a new search is performed.

Examples

You have loaded the picture of an interesting event, and you want to see all clips that
contain that same event. Call the Sort->TC function, select the network/local search
option and launch the search. Move the jog dial and you will see the same event on the
same timecode from all available camera angles that have been clipped.

You know the timecode of a particular event and you want to see all clips containing
that event. Call the Sort->TC function, edit the timecode to the desired value, select
the network/local search option and press ENTER: you will obtain the same result as
above if the timecode belongs to the same type as the one previously mentioned.

4.4.8.

Shortening a Clip

You can shorten a clip using the Remote Panel.

To shorten a clip, proceed as follows:

1. Recall the desired clip by pressing the corresponding F_ key.

2. Move the jog dial to browse the clip and reach to the desired Short IN point.

3. Press the IN key to mark a new Short IN point. This new Short IN point is instantly

saved.

4. Move the jog dial to reach the desired Short OUT point.

5. Press the OUT key to mark a new Short OUT point. This new Short OUT point is

instantly saved.

Move the lever or press the PLAY key to play the clip. The replay will stop at the new
Short OUT point (or after the Short OUT point if the post-roll mode is enabled).

Note
You can use Goto IN and Goto OUT functions to jump immediately onto Short
IN or Short OUT points respectively.

66

4. Clip Management

EVS Broadcast Equipment S.A.

Issue 11.02.A July 2013