Acroprint timeQplus (software version 4.x and above) - Manual (Page 66)

timeQplus Administrator Functions
06-0414-000 Rev. B 62
Copying Multiple Finger Templates from One Time Clock to Another
timeQplus is capable of storing only one (1) primary finger template for each employee; however the
TQ600B Time Clock is capable of storing up to ten (10) finger templates for each employee.
If you wish to enroll multiple finger templates for employees on more than one Time Clock, you will need
to download the finger templates from a Time Clock to a USB flash drive then upload the finger templates
to one or more additional Time Clocks.
The process is as follows:
1. Insert a flash drive into the Time Clock that has the multiple finger templates.
2. Select Menu, then PenDrive Mng and then press OK.
3. Select DwnLoad User and then press OK. You will see “Copy Data Suc” displayed once
download is complete.
4. Press ESC until you see the Welcome screen.
5. Remove the flash drive.
6. Insert the Flash Drive into the next Time Clock.
7. Select Menu, then PenDrive Mng and then press OK
8. Select UpLoad User and then press OK. You will see “Copy Data Suc” displayed once upload is
complete.
9. Press ESC until you see the Welcome screen.
10. Remove the Flash Drive.
11. Test an employee with multiple Fingers to see if all finger templates were uploaded successfully.
12. Repeat steps 6 -11 for all remaining Time Clocks.