Acroprint timeQplus (software version 4.x and above) - Manual (Page 65)

timeQplus Administrator Functions
06-0414-000 Rev. B 61
This Time Clock is now moved from the Ethernet or Comm Port connections tab to the USB Flash Drive
connection tab. All employees assigned to the Time Clock will still remained assigned.
Note: If you want to assign additional employees, you will have to add them to the Time Clock manually
or via a Flash Drive.
To change a Time Clock’s connection type from USB to Ethernet or Serial:
• Select the desired USB Flash Drive Time Clock and click "Time Clock Details".
• Check "Network Device" or "Serial Device".
o When selecting "Network Device", make sure you input the correct IP Address and
Password (if applicable).
o When selecting "Serial Device", make sure you enter the correct Serial Port number and
Baud Rate
• Click
the Save button when finished.
The Time Clock is now moved from the USB Flash Drive tab to the Ethernet or Comm Port connection
tab.