Xerox 785 - Manual (Page 78)

Programming the Machine
2-58 WorkCentre Pro 665/685/765/785
Download
This selection is used to enable firmware to be downloaded to the
machine. The options are anytime or If no job in memory.
There are two Download selections: No Job in Memory and Any
Time.
1. Press:
To download the firmware when there is no job in memory, press
.
To download the firmware at anytime, press .
2. The menu selection screen redisplays. Press Exit or Stop to
return to the Standby Mode.
*** Menu item numbers may vary according to configurations.
Menu ***
Download firmware
1. No job in memory
2. Anytime