Xerox 785 - Manual (Page 143)

Transmitting Documents
WorkCentre Pro 665/685/765/785 5-29
Transmitting Using a Department Code
When the Department Code option is set, the “Enter Dept. code”
screen is displayed.
To set or change Department Codes, refer to Chapter 2, “Changing
Department Codes”.
To use the machine:
Enter the 5-digit Department Code, then press Enter.
The standby mode screen displays.
If no activity is performed within 1 minute after entering the
Department Code, the display returns to the “Enter Dept. code”
screen.
12-01-1999 13:47
Free memory 100%
Enter dept. code