Xerox 785 - Manual (Page 22)

Programming the Machine
2-2 WorkCentre Pro 665/685/765/785
Keys used in Menu Mode Operation
The following table lists the keys commonly used when programming
the machine in Menu Mode.
Key Key Description
Press the Menu key to change the display from
Standby Mode to the menu screen. When the
menu screen is already displayed, press this key
to scroll up through the menu selections.
When a menu screen is displayed, press the
Down arrow key to scroll down through the menu
selections.
When the menu screen is displayed, press the
Left arrow key to display the preceding menu.
When entering characters, use this key to move
the cursor to the left.
When entering characters, use the Right arrow
key to move the cursor to the right.
When the currently highlighted menu has
sub-items, press the
Enter key to display the
screen of sub-items.
Press the Exit key to exit the menu mode.
Numeric Keypad The Numeric Keypad is used to enter numeric
information.
Keyboard The Keyboard is used to enter alpha and special
characters information.
Menu
Enter
Exit