Xerox 785 - Manual (Page 76)

Programming the Machine
2-56 WorkCentre Pro 665/685/765/785
Send After Scan Default Setting
This feature enables you to determine whether the dialing starts while
the machine is scanning the documents or after the machine has
scanned all documents in the Memory Send mode.
Also, if the dialing after scanning is selected, you can select to delete
or send the scanned pages when the memory becomes full during
scanning.
To set the Send After Scan default mode:
1. Press:
2. To disable Send After Scan, press , then go to step 4.
To enable Send After Scan, press , then go to step 3.
3. Select the memory full option.
To delete the pages being scanned, press .
To send the pages being scanned, press .
4. The menu selection screen redisplays. Press Exit or Stop to
return to the Standby Mode.
*** Menu item numbers may vary according to configurations.
Menu ***
Type of send
1. Dial while scan
2. Dial after scan
When memory full
1. Delete scan pages
2. Send scan pages