Xerox 785 - Manual (Page 102)

Dialing Methods
4-2 WorkCentre Pro 665/685/765/785
Manual Dial (On-hook and Off-hook Dialing)
To initiate On-hook dialing press the Manual Dial key, dial the
number and listen for a facsimile tone, then press the Start key to
initiate a transmission.
To initiate Off-hook dialing, lift the optional handset from the cradle,
dial the number and listen for a fax tone, then press the
Start key to
initiate a transmission.
You can perform all the dialing methods in this mode. To dial the
remote station using Manual Dial:
1. Load the document face down in the Document Tray.
2. If desired set the Resolution and Contrast.
3. Lift the handset, or press:
4. Enter the fax phone number then press Enter, if necessary. To
enter a pause, press the Pause key. To enter a Charge Code,
press the Charge Code key after the telephone number.
12-01-1999 13:47
Ready
Free memory
100%
Dial or press Copy
Manual
Dial
Dial fax number
Fax number: