Xerox 785 - Manual (Page 306)

B-16 WorkCentre Pro 665/685/765/785
CAUTION
Always hold the Developer Assembly by the green
handles. Do not touch the green drum area or the
black toner roller. Do not leave the Drum Unit out of
the machine for an extended period.
Touching the drum or exposing the Drum Unit to light
could lower the print quality.
2. Remove the Developer Assembly from the machine. The
following figure shows how to remove the Developer Assembly.
3. Lift up on the 2 green handles to separate the Drum Unit from the
Developer Assembly. The following figure shows the Drum Unit
separated from the Developer Assembly.
Developer
065
Assembly
Drum Unit
Developer Assembly
098