Xerox 785 - Manual (Page 145)

Transmitting Documents
WorkCentre Pro 665/685/765/785 5-31
3. Use the Numeric Keypad to enter the number of hours (you must
use 2 digits) for the machine to store the document, then press
Enter.
4. The menu selection screen redisplays. Press Stop to return to
the Standby Mode.
Resending a Stored Fax
When the Resend Stored Fax feature is enabled, any document that
exceeds the number of allowed redials is not cleared, but saved in
memory for a specified length of time. Perform this procedure to
resend a fax that is stored for resending. If the facsimile number you
dialed was not correct, you can change the number before resending
the document. Each time this procedure is performed, the number of
redials counter is reset.
To resend a stored fax:
1. Press:
2. Press the or keys to view the jobs stored for
resending.
If the job you want to resend was dialed using the Numeric Keypad
and with no Fax Options, go to Step 3. If the job you want to resend
was other than the above, go to Step 5.
3. While viewing the job to resend, press Enter or Start. (If the
original job was dialed using the keypad, the next screen will
allow the phone number to be changed).
Resend Resend stored fax
ENTER to start
CANCEL to delete
[
↑ ↓ ] to search