Long original setting, Long original setting -41 – Xerox 785 User Manual
Page 61
Programming the Machine
WorkCentre Pro 665/685/765/785
2-41
Long Original Setting
Using the Long Original setting enables the WorkCentre to scan long
documents. The available length options are:
To set the Long Original setting:
1.
Press:
2.
Select the Long Original option:
To select 1m, press
.
To select Any length, press
.
3.
The menu selection screen redisplays. Press
Exit or Stop to
return to the Standby Mode.
*** Menu item numbers may vary according to configurations.
1 M:
Allows document sizes up to 1 Meter in length (39.4
inches). If a document longer than 1M is scanned, a
“Paper Jam” occurs.
Any Length:
Allows any length document to be scanned.
Note:
Selecting Any length turns off the document jam sensor.
Menu
***
Long original
1. 1m (39 Inches)
2. Any length