Xerox 785 - Manual (Page 149)

Transmitting Documents
WorkCentre Pro 665/685/765/785 5-35
To perform a ITU-T Relay Transmission:
1. Load the document face down in the Document Tray.
2. Select the desired Resolution and Contrast.
3. Press:
4. Using the Numeric Keypad enter a relay box number, then press
Enter.
5. Select the Password option:
To assign a password, press and go to step 6.
If you do not want to assign a password, press and go to
step 7.
6. Using the Numeric Keypad, enter the password you want to
assign to this box, then press
Enter.
Note: A Password is required receive to a Relay Box.
Mailbox
Send (Relay)
Box number (20 max):
Setup password
1. Yes
2. No
Enter password
Password (20 max):