Xerox 785 - Manual (Page 144)

Transmitting Documents
5-30 WorkCentre Pro 665/685/765/785
Resend Stored Fax Default Setting
Normally, when a transmission can not be completed, the machine
automatically attempts to send the document according to the redial
criteria. When the number of attempts exceeds the redial counter, the
document is cleared from the memory.
With the Resend Stored Fax feature enabled, any document which
exceeds the number of redials set is not cleared, but saved in
memory for the specified length of time. See the “Resend Stored Fax”
procedure that follows, to resend the stored document.
To set the Resend Stored Fax default setting:
1. Press:
2. Select the Resend Stored Fax option:
To enable the Resend Stored Fax feature, press .
To disable the Resend Stored Fax feature, press , then
press Stop to return to the Standby mode.
Note: When the Resend Stored Fax feature is enabled, the
stored time is recorded in the Pending Jobs Report (see
Chapter 12).
Menu ***
Resend stored fax
1. On
2. Off
Resend stored fax
Store for (01-24) hrs:
14