Xerox 785 - Manual (Page 120)

Transmitting Documents
5-6 WorkCentre Pro 665/685/765/785
Direct Send
When the Direct Send default transmission mode is selected, the
machine first dials the remote fax machine and confirms the
connection. When the connection is confirmed the machine sends
each document page as it is scanned.
To send a single transmission in Direct Send Mode, refer to the
“Direct Send with Memory Send Selected” procedure that follows.
To send a document using the Direct Send mode as the default
transmission mode:
1. Load the document face down in the Document Tray.
2. Select the desired Resolution and Contrast.
3. Using one of the dialing methods, dial the fax number and press
Start, if necessary. (See Chapter 4, “Dialing Methods”.)
The machine assigns a job number, dials the number and scans the
pages as they are transmitted.
Note: You may select another option for this job. Refer to the
selected option for the procedure.
12-01-1999 13:47
Ready
Free memory
100%
Dial or press Copy
Dialing
Job number:
022
5551212