Xerox 785 - Manual (Page 148)

Transmitting Documents
5-34 WorkCentre Pro 665/685/765/785
ITU-T Relay Communications
Relay Communication allows you to send documents from your fax
machine (initiating station) to one fax machine (relay station), which
further sends them to additional fax machines (end stations). If you
have several end stations in one or more regional areas you can save
time and phone expense by setting up a relay system.
ITU-T Relay Transmission
To perform a ITU-T relay operation, the following information must be
programmed in your machine.
Initiating Station Setup:
•
Assign the relay station telephone number to a One Touch Key or
Speed Dial number
Relay Station Setup:
•
The relay station must program the end station telephone
numbers to Speed Dial numbers One Touch numbers or Group
numbers. Up to 50 speed dial numbers or one touch numbers or
groups can be programmed. The relay station must use the
“Presetting Relay Box” procedure.
•
The relay station must provide these numbers and any required
passwords to the Initiating Station.
Example:
Relay
Box
End
Station
End
Station
1 Relay
Station End Stations (up to
50 stations/groups) 1 Originator
Relay station
box number/
password/relay
station number
programmed to
a Speed Dial
number or One
Touch key on
the Initiating
Station. Relay box
numbers/passw
ords/end station
numbers
programmed to
Speed Dial
numbers, One
Touch keys, or
Groups.
Initiating
Station