Xerox 785 - Manual (Page 169)

Polling
WorkCentre Pro 665/685/765/785 7-7
5. Select the type of security used when the previous document was
stored to the Poll-once box.
If no security was used, press , then go to step 7.
If only a security code was used, press .
If only the remote fax number was used, press .
If both the remote fax number and a security code were used,
press .
– or –
6. Using the numeric keypad, enter the Security Code, Fax Number
or both that were used when the previous document was stored
in this Poll-once box. Press the
Enter key after each entry.
7. Select the change option:
To delete and replace the stored document, press . The
document is scanned and the machine returns to the Standby
Mode.
To add this document to the stored document, press . The
document is scanned and assigned a job number.
The machine returns to the Standby Mode.
To retain the current stored document, press and then
press Stop. The machine returns to the Standby Mode.
Scan to be polled:
Security code
Scan to be polled:
Secure fax (20 max):
Already assigned
1. Delete
2. Add +
3. Retain