One touch dialing, One touch dialing -7 – Xerox 785 User Manual
Page 107
Dialing Methods
WorkCentre Pro 665/685/765/785
4-7
5.
Using the Numeric Keypad, enter the Speed Dial number, then
press
Start.
after 2 seconds
…
The machine automatically dials the phone number, confirms the
connection, and sends the document.
One Touch Dialing
If you programmed a remote party’s number to a One Touch key, you
can dial that number by pressing the corresponding One Touch key.
To use this function, the One Touch number must be programmed in
the Phonebook (see “Presetting One Touch Numbers”). To link a One
Touch Key to a Speed Dial or Group Number see “Presetting Speed
Dial Numbers” in Chapter 2 or “Presetting Group Numbers” in
Chapter 8.
To dial the remote station using One Touch dialing:
1.
Load the document face down in the Document Tray.
2.
Select the desired
Resolution and Contrast.
3.
Press a
One Touch key.
Speed dial
001
XEROX
Scanning into memory
Job number:
041
Free memory:
85%
12-01-1999 13:47
Ready
Free memory
100%
Dial or press Copy
One touch key:
01
XEROX