ZyXEL Communications XGS-4728F User Manual
Page 52
Chapter 4 The Web Configurator
XGS-4728F User’s Guide
52
Loop Guard
This link takes you to a screen where you can configure protection
against network loops that occur on the edge of your network.
VLAN Mapping This link takes you to screens where you can configure VLAN mapping
settings on the Switch.
Layer 2
Protocol
Tunneling
This link takes you to a screen where you can configure L2PT (Layer 2
Protocol Tunneling) settings on the Switch.
IP Application
Static Route
This link takes you to a screen where you can configure static routes. A
static route defines how the Switch should forward traffic by configuring
the TCP/IP parameters manually.
RIP
This link takes you to a screen where you can configure the RIP (Routing
Information Protocol) direction and versions.
OSPF
This link takes you to screens where you can view the OSPF status and
configure OSPF settings.
IGMP
This link takes you to a screen where you can configure the IGMP
settings.
DVMRP
This link takes you to a screen where you can configure the DVMRP
(Distance Vector Multicast Routing Protocol) settings.
DiffServ
This link takes you to screens where you can enable DiffServ, configure
marking rules and set DSCP-to-IEEE802.1p mappings.
DHCP
This link takes you to screens where you can configure the DHCP
settings.
VRRP
This link takes you to screens where you can configure redundant virtual
router for your network.
Management
Maintenance
This link takes you to screens where you can perform firmware and
configuration file maintenance as well as reboot the system.
Access Control This link takes you to screens where you can change the system login
password and configure SNMP and remote management.
Diagnostic
This link takes you to screens where you can view system logs and can
test port(s).
Syslog
This link takes you to screens where you can setup system logs and a
system log server.
Cluster
Management
This link takes you to a screen where you can configure clustering
management and view its status.
MAC Table
This link takes you to a screen where you can view the MAC address and
VLAN ID of a device attach to a port. You can also view what kind of
device it is.
IP Table
This link takes you to a screen where you can view the IP addresses and
VLAN ID of a device attached to a port.You can also view what kind of
device it is.
ARP Table
This link takes you to a screen where you can view the MAC address – IP
address resolution table.
Table 7 Navigation Panel Links (continued)
LINK
DESCRIPTION