ZyXEL Communications XGS-4728F - Manual (Page 281)

Chapter 32 OSPF
XGS-4728F User’s Guide
281
32.5 Configuring OSPF Redistribution
Use this screen to configure route redistribution and summary addresses. Route
redistribution is used when other routers which use RIP routing protocol and/or
static routes need to exchange routing information with the Switch using OSPF
routing protocol. A summary address is used to cover more than one routing
entries in order to reduce the routing table size.
In the OSPF Configuration screen, click Redistribute to display the OSPF
Redistribution screen.
Figure 152 IP Application > OSPF Configuration > Redistribute
The following table describes the labels in this screen.
Stub
Network This field displays whether an area is a stub network (Yes) or not (No).
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the Delete check boxes.
Table 100 IP Application > OSPF Configuration: Summary Table (continued)
LABEL DESCRIPTION
Table 101 IP Application > OSPF Configuration > Redistribute
LABEL DESCRIPTION
Redistribute
Route Route redistribution allows your Switch to import and translate external
routes learned through RIP routing protocol or configured manually
(Static) into the OSPF network transparently.
Active Select this option to activate route redistribution for routes learned through
the selected protocol.