ZyXEL Communications XGS-4728F - Manual (Page 227)

Chapter 25 AAA
XGS-4728F User’s Guide
227
- This value is set to Ethernet(15) on the Switch.
Calling-Station-Id
Frame-MTU
EAP-Message
State
Message-Authenticator
25.3.2 Attributes Used for Accounting
The following sections list the attributes sent from the Switch to the RADIUS
server when performing authentication.
25.3.2.1 Attributes Used for Accounting System Events
NAS-IP-Address
NAS-Identifier
Acct-Status-Type
Acct-Session-ID
- The format of Acct-Session-Id is date+time+8-digit sequential number,
for example, 2007041917210300000001. (date: 2007/04/19, time:
17:21:03, serial number: 00000001)
Acct-Delay-Time
25.3.2.2 Attributes Used for Accounting Exec Events
The attributes are listed in the following table along with the time that they are
sent (the difference between Console and Telnet/SSH Exec events is that the
Telnet/SSH events utilize the Calling-Station-Id attribute):
Table 73 RADIUS Attributes - Exec Events via Console
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name D D D
NAS-Identifier D D D
NAS-IP-Address D D D
Service-Type D D D
Acct-Status-Type D D D
Acct-Delay-Time D D D
Acct-Session-Id D D D
Acct-Authentic D D D
Acct-Session-Time D D
Acct-Terminate-Cause D