ZyXEL Communications XGS-4728F - Manual (Page 328)

Chapter 38 Maintenance
XGS-4728F User’s Guide
328
From the Maintenance screen, display the Firmware Upgrade screen as shown
next.
Figure 198 Management > Maintenance > Firmware Upgrade
Type the path and file name of the firmware file you wish to upload to the Switch
in the File Path text box or click Browse to locate it. Select the Rebooting
checkbox if you want to reboot the Switch and apply the new firmware
immediately. (Firmware upgrades are only applied after a reboot). Click Upgrade
to load the new firmware.
After the firmware upgrade process is complete, see the System Info screen to
verify your current firmware version number.
38.6 Restore a Configuration File
Restore a previously saved configuration from your computer to the Switch using
the Restore Configuration screen.
Figure 199 Management > Maintenance > Restore Configuration
Type the path and file name of the configuration file you wish to restore in the File
Path text box or click Browse to display the Choose File screen from which you
can locate it. After you have specified the file, click Restore. "config" is the name
of the configuration file on the Switch, so your backup configuration file is
automatically renamed when you restore using this screen.