3 multicast setting, Section – ZyXEL Communications XGS-4728F User Manual
Page 201
Chapter 24 Multicast
XGS-4728F User’s Guide
201
24.3 Multicast Setting
Click Advanced Applications > Multicast > Multicast Setting link to display
the screen as shown. See
for more information on
multicasting.
Figure 103 Advanced Application > Multicast > Multicast Setting
The following table describes the labels in this screen.
Table 62 Advanced Application > Multicast > Multicast Setting
LABEL
DESCRIPTION
IGMP Snooping
Use these settings to configure IGMP Snooping.
Active
Select Active to enable IGMP Snooping to forward group multicast
traffic only to ports that are members of that group.
Querier
Select this option to allow the Switch to send IGMP General Query
messages to the VLANs with the multicast hosts attached.
Host Timeout
Specify the time (from 1 to 16 711 450) in seconds that elapses before
the Switch removes an IGMP group membership entry if it does not
receive report messages from the port.
802.1p Priority
Select a priority level (0-7) to which the Switch changes the priority in
outgoing IGMP control packets. Otherwise, select No-Change to not
replace the priority.