Yamaha TG500 - Manual (Page 87)

75
LAYER DATA COPY
This function facilitates performance editing by allowing the layer parameters
from any layer in any other performance (the “source” performance) to be copied to
the current layer. You can copy a layer setup that is close to the type you want, then
edit it to produce the required sound.
Press the [STORE/COPY] key while in the layer edit mode.
PERFORMANCE EDIT MODE / 3: Full Edit. 3-1: Layer
LAYER DATA COPY
PFM LAYER Copy from?
´0 0:CO Aster Layer=A
Position the cursor at the left parameter (press the [
,] key) and then use the
[MEMORY] key to select the internal, preset, or card memory; then use the [-1/NO]
and [+1/YES] keys to select the performance combination from the which the data is
to be copied. Move the cursor to the right parameter (press the [
.] key) and use the [-
1/NO] and [+1/YES] keys to select layer from which the data is to be copied (A, B,
C, or D).
Once the source performance combination and layer have been selected, press the
[ENTER] key. “Sure?” will appear on the display.
PFM LAYER Copy Sure?
´00:CO Aster Layer=A
Press the [+1/YES] key to copy the layer data, or press [-1/NO] to cancel the
copy operation. Once the copy operation has finished, “Completed!” will appear on
the display briefly, then the display will return to the layer edit mode.
[PLAY MODE] -> PFM PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-1:Layer -> [ENTER]
-> [STORE/COPY]