Yamaha TG500 - Manual (Page 164)

152
VOICE EDIT MODE / 3: Full Edit. 3-7: Effect
3-7-03: SEND
The balance between the direct sound of the voice and the effect sound is a
delicate thing. Even slight changes can make a big different to the final sound. The
“Send” parameter plays a vital role in determining the depth of the effect sound.
VCE EF Send
Level= 127
Level (Send level)
Range: 0 … 127
This parameter adjusts the amount of direct voice signal that is sent to the
effect processors, determining the strength of the final effect sound. A setting
of “0” results in no effect, leaving only the “dry” sound of the voice.
The maximum setting of “127” produces the maximum amount of effect.
3-7-03: SEND
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-7: Effect -> [ENTER]
-> [PAGE] -> 3-7-03: Send -> [ENTER]