Yamaha TG500 - Manual (Page 237)

225
UTILITY MODE / WAVE EDIT MODE / 2: Controller
2-2: VOLUME CONTROL
2-2: VOLUME CONTROL
This parameters specifies which MIDI control device will control the TG500’s
overall volume level.
UTL CTRL (Main Vol)
Volume= 007
Volume
Range: 000 … 119
The normal setting for this parameter is “007” (this is the MIDI “main
volume control” device assignment). Any other controller number can be as-
signed, as required.
Some MIDI control change numbers are assigned to specific control devices
(see list below), while others have no specific controller assignment. If a con-
trol device is assigned to the selected controller number, an abbreviation of the
device name appears in parentheses in upper right corner of the display.
[UTILITY/SELECT] -> 2: Controller -> [ENTER] -> [PAGE] -> 2-2: Volume Control -> [ENTER]